Premixed (wet), non-hydraulic, hot-mixed, traditional lime putty base & float coat lime plaster with fibres.
Lime Plaster (Base) is hot-mixed at a ratio of 1:4 (Quicklime:Sand) which is an equivalent of a 1:2 (Lime Putty:Sand) mix when bagged.
Suitable onto: Lime base coats, Riven & Sawn laths, soft and porous historic Brick, Stone & Masonry.
NB. Lime Plaster (Base) is only recommended for internal use.
NB. Supply and sale of components and products for various construction systems ordered from our website, over the phone or from our Yard does NOT constitute a specification.
Contents:
1 part: Lime Putty
1 part: Plastering Sand <2mm
1 part: Sharp Washed Sand <4mm
2.5kg/1000kg Polypropylene Fibre 12/18mm
Coverage:
25kg bag will cover approx:
0.85m2 onto laths and 1m2 onto level masonry or as a float coat @ 10mm thick.
1000kg bag will cover approx:
40m2 onto laths and 50m2 onto masonry or as a float coat @ 10mm thick.
NB. Every effort has been made to ensure the accuracy of the colour and texture of products on this website but due to the limitations of technology, we strongly recommend that sample products are purchased for testing in situ prior to the full order being placed.
NB. It is strongly recommended to use a competent plasterer who is experienced in using lime plasters with the requisite skills, technique and specialist qualifications and experience to carry out the job.
NB. Our quality lime products are from naturally occurring raw materials and on occasion aggregates and lime may differ slightly from batch to batch in colour and texture. Every effort is made to produce a consistent product as part of our own factory controlled procedures and quality control. It is strongly recommended to test a small amount of material, in situ, to assess suitability and performance and purchase adequate amounts of product from the same batch to fulfil any job. Chalk Down Lime Ltd can NOT guarantee the colour and texture of our premixed lime putty mortars and plasters.
